Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR › 2020.02–2020.11
RM37A0E _51 Engine / Hybrid System _086849 2GR-FKS ENGINE CONTROL _0418444 CRANKSHAFT POSITION SENSOR A

2GR-FKS ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during crankshaft position sensor removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Gas leak from exhaust system is repaired Perform Inspection After Repair
·

Poor idle, etc.

·

Engine start function, etc.


(Click here)

PROCEDURE

Hide 17150 1.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (TWC: Front Catalyst)

Hide 19312 2.REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR

a.
A408199

Remove the nut and hose clamp from the crankshaft position sensor protector.


b.
A408200

Remove the 3 bolts and crankshaft position sensor protector from the cylinder block sub-assembly and oil pan sub-assembly.


Hide 11401G 3.REMOVE CRANKSHAFT POSITION SENSOR

a.
A421896

Disconnect the crankshaft position sensor connector.


b.

Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.



c.
A459458C01
1.667,1.656 1.667,1.271 false 1.615,1.656 1.927,1.854 0.313,0.198 10 false *1
*1 O-ring


Perform this procedure only when reusing the crankshaft position sensor.

i.

Remove the O-ring from the crankshaft position sensor.

NOTICE:
·

Make sure to only remove the O-ring with bare hands.

·

When removing the O-ring, be careful not to damage the O-ring groove of the crankshaft position sensor.

·

If the O-ring groove of the crankshaft position sensor is damaged, replace the crankshaft position sensor with a new one.