Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › IGNITION COIL AND SPARK PLUG
RM37A0E _51 Engine / Hybrid System _086849 2GR-FKS ENGINE CONTROL _0418445 IGNITION COIL AND SPARK PLUG A

2GR-FKS ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  INSTALLATION  


PROCEDURE

Hide 19100P 1.INSTALL SPARK PLUG

Hide 19500 2.INSTALL IGNITION COIL ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing an ignition coil assembly.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install the 3 ignition coil assemblies to the cylinder head cover sub-assembly with the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

If an ignition coil assembly has been struck or dropped, replace it.


HINT:

Install the same parts to their original positions.



b.

Connect the 3 ignition coil assembly connectors and engage the 2 wire harness clamps.


c.

Install the engine wire with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


d.

Install the 3 ignition coil assemblies to the cylinder head cover sub-assembly LH with the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

If an ignition coil assembly has been struck or dropped, replace it.


HINT:

Install the same parts to their original positions.



e.

Connect the 3 ignition coil assembly connectors.


Hide 17190 3.INSTALL INTAKE AIR SURGE TANK ASSEMBLY

Hide 4.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION