This DTC is stored when a malfunction occurs in the radio and display receiver assembly*1 or stereo component amplifier assembly*2.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15A3 | Stereo Component Amplifier Malfunction | When any of the following conditions is met:
·
Internal power supply malfunction ·
DSP error ·
EEPROM error |
·
Radio and display receiver assembly*1 ·
Stereo component amplifier assembly*2 |
*1: w/o Stereo Component Amplifier Assembly
*2: w/ Stereo Component Amplifier Assembly
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (w/o Stereo Component Amplifier Assembly) | B |
| NG (w/ Stereo Component Amplifier Assembly) | C |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
C