Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for 8 Inch Display)
RM37A0E _56 Audio / Visual / Telematics _086878 NAVIGATION / MULTI INFO DISPLAY _0418790 NAVIGATION SYSTEM(for 8 Inch Display) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for 8 Inch Display)  Display does not Dim when Light Control Switch is Turned ON  


CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for 8 Inch Display)>PRECAUTION


PROCEDURE

1.CHECK IMAGE QUALITY SETTING
a.

Turn the light control switch to the tail or head position.


b.

Check that the daytime screen setting on the display adjustment screen is set to on.


Result:
Result Proceed to
Daytime screen setting is set to on. A
Daytime screen setting is set to off. B



A

CHANGE DAYTIME SCREEN SETTING TO OFF

B

2.CHECK VEHICLE SIGNAL (OPERATION CHECK)
2.CHECK VEHICLE SIGNAL (OPERATION CHECK)
a.
E225854

Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for 8 Inch Display)>OPERATION CHECK


b.

Check that the display changes between ON and OFF according to the light control switch operation.

OK:
Light Control Switch Display
Tail or head ON
Off or AUTO OFF


HINT:
·

The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

·

Make sure to move the vehicle to a bright area before performing an operation check with the light control switch in the AUTO position.




Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG