16031
1.INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
Install a new gasket to the water inlet with thermostat sub-assembly.
Install the water inlet with thermostat sub-assembly with the 2 bolts and 2 nuts.
16261
2.CONNECT WATER BY-PASS HOSE
Connect the water by-pass hose and slide the clip to secure it.
12315
3.INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET LH
82121
4.CONNECT ENGINE WIRE
Engage the clamp to connect the engine wire.
Install the bolt.
Connect the water inlet with thermostat sub-assembly connector.
12327
5.INSTALL REAR ENGINE MOUNTING STAY RH
6.INSTALL ENGINE ASSEMBLY WITH TRANSAXLE