16535
1.INSTALL LOWER RADIATOR SUPPORT
Install the 2 lower radiator supports to the radiator assembly.
16523A
2.INSTALL RADIATOR SUPPORT CUSHION
Install the 2 radiator support cushions to the radiator assembly.
16400
3.INSTALL RADIATOR ASSEMBLY
Engage the 2 guides.
Engage the 2 claws to install the fan with motor assembly to the radiator assembly.
Do not damage the radiator assembly when installing the fan with motor assembly.
Install the radiator assembly with the fan with motor assembly to the vehicle body.
Do not apply excessive force to the cooler condenser assembly or pipe when installing the radiator assembly with the fan with motor assembly.
Engage the 2 guides.
Engage the 2 claws to install the cooler condenser assembly to the radiator assembly.
Make sure not to damage the cooler condenser assembly when installing the cooler condenser assembly.
Engage the 2 clamps to connect the wire harness to the fan with motor assembly.
Connect the cooling fan motor connector and rotate the lever to lock it.
When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water and other foreign matter.
Be sure to securely connect the cooling fan motor connector.
Engage the clamp to connect the wire harness to the fan with motor assembly.
Connect the cooling fan motor connector.
16572D
4.CONNECT NO. 2 RADIATOR HOSE
Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.
16573B
5.CONNECT NO. 3 RADIATOR HOSE
Connect the No. 3 radiator hose to the radiator assembly and slide the clip to secure it.
Engage the clamp to connect the No. 3 radiator hose to the fan with motor assembly.
16283D
6.CONNECT NO. 6 WATER BY-PASS HOSE
Connect the No. 6 water by-pass hose to the radiator assembly.
16281N
7.CONNECT NO. 4 WATER BY-PASS HOSE
Connect the No. 4 water by-pass hose to the radiator assembly and slide the clip to secure it.
Engage the clamp to connect the No. 4 water by-pass hose to the fan with motor assembly.
16594A
8.INSTALL NO. 2 RADIATOR AIR GUIDE
Install the No. 2 radiator air guide.
Install the hood lock control cable assembly.
53205
9.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY
Engage the 3 claws.
Install the upper radiator support sub-assembly with the 5 bolts.
Engage the clamp to connect the hood lock control cable assembly to the upper radiator support sub-assembly.
Install the inlet hose with the bolt.
Engage the wire harness clamp.
Connect the 2 horn connectors.
16593B
10.INSTALL NO. 1 RADIATOR AIR GUIDE RH
Engage the guide and claw.
Install the No. 1 radiator air guide RH with the clip.
16595B
11.INSTALL NO. 1 RADIATOR AIR GUIDE LH
Engage the guide and claw.
Install the No. 1 radiator air guide LH with the clip.
17750A
12.INSTALL INLET AIR CLEANER ASSEMBLY
53510
13.INSTALL HOOD LOCK ASSEMBLY
52021
14.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
52611
15.INSTALL FRONT BUMPER ENERGY ABSORBER
88790B
16.INSTALL THERMISTOR ASSEMBLY
17.INSTALL HEADLIGHT ASSEMBLY
18.ADD ENGINE COOLANT
19.INSPECT FOR COOLANT LEAK
51443C
20.INSTALL REAR ENGINE UNDER COVER RH
51444A
21.INSTALL REAR ENGINE UNDER COVER LH
51441
22.INSTALL NO. 1 ENGINE UNDER COVER
53851D
23.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
53852B
24.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH