Home › Engine / Hybrid System › A25A-FXS, A25B-FXS (LUBRICATION) › OIL PRESSURE SWITCHING VALVE
RM37A0E _51 Engine / Hybrid System _086911 A25A-FXS, A25B-FXS LUBRICATION _0419957 OIL PRESSURE SWITCHING VALVE A

A25A-FXS, A25B-FXS LUBRICATION  OIL PRESSURE SWITCHING VALVE  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15250 1.INSTALL OIL PRESSURE CONTROL VALVE ASSEMBLY

a.
A402134C01
0.75,0.563 0.938,0.563 0.938,0.563 1.333,0.958 false 0.604,0.458 0.917,0.615 0.313,0.156 10 false *a
*a O-ring


Apply a small amount of engine oil to the O-ring of the oil pressure control valve assembly.


b.

Using an 8 mm socket wrench, install the oil pressure control valve assembly to the timing chain cover assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

When reusing the oil pressure control valve assembly, inspect the O-ring.

·

Make sure that the O-ring is not cracked or does not move out of place during installation.




c.

Connect the oil pressure control valve assembly connector.