15710
1.INSTALL OIL COOLER ASSEMBLY
Install the No. 1 cylinder block insulator and 2 new O-rings.
Install the oil cooler assembly with the 2 bolts and 2 nuts.
Connect the No. 4 water by-pass hose and No. 5 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.
Install the hose clamp with the nut.
17150
2.INSTALL EXHAUST MANIFOLD ASSEMBLY LH (TWC: Front Catalyst)
3.ADD ENGINE OIL
4.ADD ENGINE COOLANT
5.CHECK ENGINE OIL LEVEL
6.INSPECT FOR ENGINE OIL LEAK
7.INSPECT FOR COOLANT LEAK