Home › Power Source / Network › A25A-FXS, A25B-FXS (BATTERY / CHARGING) › BATTERY CURRENT SENSOR
RM37A0E _57 Power Source / Network _086913 A25A-FXS, A25B-FXS BATTERY / CHARGING _0419979 BATTERY CURRENT SENSOR A

A25A-FXS, A25B-FXS BATTERY / CHARGING  BATTERY CURRENT SENSOR  INSTALLATION  


PROCEDURE

Hide 28850C 1.INSTALL BATTERY STATE SENSOR ASSEMBLY

a.

Engage the 4 claws to install the battery state sensor assembly to the battery current sensor holder.


b.

Engage the wire harness clamp.


c.

Connect the battery state sensor assembly connector.


d.

Install the battery state sensor assembly to the auxiliary battery and tighten the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


e.

Connect the No. 2 frame wire to the battery state sensor assembly with the nut.

Torque:
7.6 N*m (77 kgf*cm, 67 in.*lbf)

NOTICE:

When disconnecting the No. 2 frame wire, some systems need to be initialized after the No. 2 frame wire is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



Hide 58441L 2.INSTALL BATTERY SERVICE HOLE COVER