Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › ACCELERATOR PEDAL SENSOR › 2020.02–2020.11
RM37A0E _51 Engine / Hybrid System _086850 HYBRID / BATTERY CONTROL _0420004 ACCELERATOR PEDAL SENSOR A

HYBRID / BATTERY CONTROL  ACCELERATOR PEDAL SENSOR  REMOVAL  


PROCEDURE

Hide 67914 1.REMOVE FRONT DOOR SCUFF PLATE LH

Hide 62112A 2.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 55606 3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 78110K 4.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



a.
A454783

Disconnect the accelerator pedal sensor assembly connector.


b.

Remove the 3 nuts and disconnect the rod of the accelerator pedal sensor assembly from the accelerator pedal to remove the accelerator pedal sensor assembly.

NOTICE:

If the accelerator pedal sensor assembly has been struck or dropped, replace it.



Hide 78118 5.REMOVE ACCELERATOR PEDAL PAD

a.
A454784

Disengage the 4 claws and remove the accelerator pedal pad from the accelerator pedal.


Hide 78111 6.REMOVE ACCELERATOR PEDAL

a.
A454785

Remove the 2 bolts.


b.
A454786C01
2.333,1.708 2.333,1.427 false 2.344,3.063 2.344,2.781 false 2.26,1.698 2.573,1.896 0.313,0.198 10 false *a 2.271,3.052 2.583,3.25 0.313,0.198 10 false *a
*a Vehicle Body
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Push the accelerator pedal in the direction indicated by the arrow (1) shown in the illustration to disengage the claw.


c.

Pull the accelerator pedal in the direction indicated by the arrow (2) shown in the illustration to remove it.