Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › SERVICE PLUG GRIP
RM37A0E _51 Engine / Hybrid System _086850 HYBRID / BATTERY CONTROL _0420008 SERVICE PLUG GRIP A

HYBRID / BATTERY CONTROL  SERVICE PLUG GRIP  INSTALLATION  


PROCEDURE

Hide G3834 1.INSTALL SERVICE PLUG GRIP

CAUTION:

Be sure to wear insulated gloves.


NOTICE:

Before installing the service plug grip, check that no parts or tools remain and that the high voltage terminals and connectors are connected securely.


a.

While wearing insulated gloves, and temporarily install the service plug grip as indicated by the arrow (1) shown in the illustration.

A455852N01
1.979,1.781 2.135,1.979 0.156,0.198 10 true 1 1.26,0.771 1.417,0.969 0.156,0.198 10 true 2 5.625,1.365 5.781,1.563 0.156,0.198 10 true 3


b.

Rotate the handle of the service plug grip 90° toward the HV battery and slide it in the direction indicated by the arrow (3) shown in the illustration until a click sound is heard to install the service plug grip.


Hide G92T9 2.INSTALL HYBRID BATTERY SERVICE PLUG COVER

CAUTION:

Be sure to wear insulated gloves.


a.

Engage the clamp to install the hybrid battery service plug cover.


b.

Install the 2 clips.


c.

Return the front floor carpet assembly and rear floor silencer to its original position.


Hide 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 58441L 4.INSTALL BATTERY SERVICE HOLE COVER