This DTC is stored when the sliding roof ECU (sliding roof drive gear assembly) has not been initialized.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2343 | Position Initialization Incomplete | Sliding roof ECU (sliding roof drive gear assembly) has not been initialized | Sliding roof ECU (Sliding roof drive gear assembly) |
If the sliding roof ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.
Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>INITIALIZATION
When DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first.
Check that the sliding roof ECU (sliding roof drive gear assembly) can be initialized.
Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>INITIALIZATION
Sliding roof ECU (sliding roof drive gear assembly) can be initialized.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check the sliding roof auto operation.
Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK
Auto operation operates normally.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Clear the DTCs.
Check for DTCs.
DTC B2343 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG