Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>PRECAUTION
Check whether the customer's device supports "Miracast" functionality.
Refer to "Miracast" Function Outline for information on supported devices.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION
| Result | Proceed to |
|---|---|
| The customer's device supports "Miracast" functionality | A |
| The customer's device does not support "Miracast" functionality | B |
A
B
Check whether the "Miracast" functionality is set to "On" in the settings of the customer's device.
"Miracast" is normally set to "Off" by default. As a result, the setting must be manually changed to "On".
The operation method differs depending on the device. The name "Miracast" also refers to "Screen Mirroring" and "Media Output", etc.
| Result | Proceed to |
|---|---|
| "Miracast" functionality is set to "On" in the settings of the customer's device | A |
| "Miracast" functionality is not set to "On" in the settings of the customer's device | B |
A
B
Check that the "Wi-Fi power" setting is "On" in the "Wi-Fi" settings on the multi-display.
Check that the "Access to network" setting is "Off" in the "Wi-Fi" settings on the multi-display.*
*: w/ "Wi-Fi" (Station) Function
Check that the "Bluetooth power" setting is "Off" on the multi-display.
Bluetooth and "Miracast" and "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, the connection may suffer from outages due to radio interference if connecting simultaneously.
| Proceed to |
|---|
| NEXT |
NEXT
Check connection:
Check the connection between the device and "Miracast" on the multi-display in the vehicle and on the device itself.
Allow Miracast video to be streamed to the multi-display and wait for 15 seconds.
Check that the smartphone screen is displayed on the multi-display.
If the "Miracast" connection cannot be established even after checking, confirm the connection again.
| Result | Proceed to |
|---|---|
| Smartphone screen is displayed on the multi-display | A |
| "Miracast" connection cannot be established even after performing the above connection check twice | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Check using another "Miracast" supported device.
| Result | Proceed to |
|---|---|
| Established connection with "Miracast" | A |
| Could not establish connection with "Miracast" | B |
A
B