Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Gasoline Model with Automatic Air Conditioning System)
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0420833 AIR CONDITIONING SYSTEM(for Gasoline Model with Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Gasoline Model with Automatic Air Conditioning System)  B1419  Rear Room Temperature Sensor Circuit  


DESCRIPTION

The No. 2 room temp. sensor (cooler thermistor) is installed in the rear panel to detect the rear cabin temperature, which is used to control the air conditioning system. The resistance of the No. 2 room temp. sensor (cooler thermistor) changes in accordance with the rear cabin temperature. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.

The air conditioning amplifier assembly applies voltage (5 V) to the No. 2 room temp. sensor (cooler thermistor) and reads voltage changes due to changes in the resistance of the No. 2 room temp. sensor (cooler thermistor).

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1419 Rear Room Temperature Sensor Circuit Open or short in rear room temperature sensor circuit
·

No. 2 room temp. sensor (cooler thermistor)

·

Harness or connector

·

Air conditioning amplifier assembly


Memorized
(4 sec. or more)*

*: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.

WIRING DIAGRAM

E432277E01
0.188,1.802 0.521,2 0.333,0.198 10 false M16 0.188,1.979 3.167,2.24 2.979,0.26 10 false No. 2 Room Temp. Sensor (Cooler Thermistor) 4.646,1.792 6.927,2.073 2.281,0.281 10 false Air Conditioning Amplifier Assembly 2.146,0.667 2.323,0.885 0.177,0.219 10 false 1 2.156,1.156 2.333,1.375 0.177,0.219 10 false 2 4.458,1.063 4.823,1.323 0.365,0.26 10 false 14 4.5,0.583 4.688,0.771 0.188,0.188 10 false 8 4.813,0.667 5.063,0.854 0.25,0.188 10 false TR 4.802,1.156 5.25,1.344 0.448,0.188 10 false SG-8 5.656,0.271 5.948,0.469 0.292,0.198 11 false 5 V 6.26,0.781 6.51,0.969 0.25,0.188 10 false AD 1.906,0.667 2.063,0.865 0.156,0.198 10 false + 1.917,1.146 2.073,1.344 0.156,0.198 10 false - 4.396,0.781 4.729,0.979 0.333,0.198 10 false H65 4.406,1.26 4.74,1.458 0.333,0.198 10 false H65

PROCEDURE

1.READ VALUE USING GTS (ROOM TEMP SENSOR (REAR))
a.

Read the Data List according to the display on the GTS.

Body Electrical > Air Conditioner > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Room Temp Sensor (Rear) No. 2 room temp. sensor (cooler thermistor) Min.: -6.50°C (20.30°F)
Max.: 57.25°C (135.05°F)
Actual cabin (rear) temperature displayed No. 2 room temp. sensor (cooler thermistor) circuit malfunction
·

When open circuit: -6.50°C (20.30°F)

·

When short circuit: 57.25°C (135.05°F)


Body Electrical > Air Conditioner > Data List
Tester Display
Room Temp Sensor (Rear)
50003 121 54
OK:

The display is as specified in the normal condition column.



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

2.INSPECT NO. 2 ROOM TEMP. SENSOR (COOLER THERMISTOR)
2.INSPECT NO. 2 ROOM TEMP. SENSOR (COOLER THERMISTOR)

OK

3.CHECK HARNESS AND CONNECTOR (NO. 2 ROOM TEMP. SENSOR (COOLER THERMISTOR) - AIR CONDITIONING AMPLIFIER ASSEMBLY)

NG

REPLACE NO. 2 ROOM TEMP. SENSOR (COOLER THERMISTOR)

3.CHECK HARNESS AND CONNECTOR (NO. 2 ROOM TEMP. SENSOR (COOLER THERMISTOR) - AIR CONDITIONING AMPLIFIER ASSEMBLY)
a.

Disconnect the H65 air conditioning amplifier assembly connector.


b.

Disconnect the M16 No. 2 room temp. sensor (cooler thermistor) connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H65-8 (TR) - M16-1 (+) Always Below 1 Ω
H65-14 (SG-8) - M16-2 (-) Always Below 1 Ω
H65-8 (TR) - Body ground Always 10 kΩ or higher
H65-14 (SG-8) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR