G1148
1.INSTALL MOTOR CABLE
Be sure to wear insulated gloves.
Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.
Keep the motor cable terminals and their installation area free from foreign matter, water, etc.
Do not touch the waterproof seal or terminals of the motor cable.
To prevent the motor cable from contacting the hybrid vehicle transaxle assembly, make sure that the inverter with converter assembly side of the motor cable is wrapped with a plastic bag or equivalent until directly before reconnection.
Engage the 2 claws to install a new terminal cap to the hybrid vehicle transaxle assembly.
Keep the terminal cap and its installation area free from foreign matter, water, etc.
Do not pinch the O-ring.
Check that the terminal cap is securely installed.
Temporarily install the connector cover to the hybrid vehicle transaxle assembly with the 2 bolts.
Tighten the 2 bolts to install the connector cover.
G9200
2.INSTALL INVERTER WITH CONVERTER ASSEMBLY