Home › Drivetrain › P810 (HYBRID TRANSMISSION / TRANSAXLE) › OIL COOLER (for Air Cooled Type)
RM37A0E _52 Drivetrain _086860 P810 HYBRID TRANSMISSION / TRANSAXLE _0420892 OIL COOLER(for Air Cooled Type) A

P810 HYBRID TRANSMISSION / TRANSAXLE  OIL COOLER(for Air Cooled Type)  REMOVAL  


PROCEDURE

Hide 53852B 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851D 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 51420 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 32917A 5.REMOVE TRANSMISSION OIL COOLER AIR DUCT

a.
C426957

Remove the 3 bolts.


b.

Disengage the guide to remove the transmission oil cooler air duct from the oil cooler assembly.


Hide 32930F 6.DISCONNECT NO. 1 TRANSMISSION OIL COOLER HOSE ASSEMBLY

C426958

a.

Slide the 2 clips and disconnect the No. 1 transmission oil cooler hose assembly from the oil cooler assembly.


Hide 32910L 7.REMOVE OIL COOLER ASSEMBLY

a.
C426960C01
0,0 0,0 false
V100135

Nut
V100136

Bolt


Remove the 2 nuts, bolt and oil cooler assembly from the transmission oil cooler bracket.


Hide 32913G 8.REMOVE TRANSMISSION OIL COOLER BRACKET

HINT:

Perform this procedure only when replacement of the transmission oil cooler bracket, No. 2 transmission oil cooler bracket or No. 3 transmission oil cooler bracket is necessary.


a.
C426961C01
0,0 0,0 false
V100135

Nut
V100136

Bolt


Remove the 2 nuts and bolt and disengage the guide to remove the transmission oil cooler bracket from the vehicle body.


b.
C426962

Remove the nut and No. 3 transmission oil cooler bracket from the No. 2 transmission oil cooler bracket.