Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER PUMP
RM37A0E _54 Brake _086869 BRAKE SYSTEM (OTHER) _0420926 BRAKE BOOSTER PUMP A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER PUMP  INSTALLATION  


PROCEDURE

Hide 47070B 1.INSTALL BRAKE BOOSTER WITH ACCUMULATOR PUMP ASSEMBLY

a.

Install the brake booster with accumulator pump assembly, brake booster pump bushing and brake actuator case collar with the nut to the brake booster with master cylinder assembly as shown in the illustration.

C426246C01
5.594,1.615 6.177,1.615 false 1.719,2.01 1.719,2.375 false 1.281,1.958 1.281,2.375 false 0.875,1.969 0.875,2.385 false 6.219,1.521 6.531,1.719 0.313,0.198 10 false *1 1.646,2.385 1.958,2.583 0.313,0.198 10 false *2 1.208,2.385 1.521,2.583 0.313,0.198 10 false *3 0.802,2.385 1.115,2.583 0.313,0.198 10 false *4
*1 Brake Booster with Accumulator Pump Assembly *2 Brake Booster Pump Bushing
*3 Brake Actuator Case Collar *4 Nut


Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


b.

Engage the 3 clamps to the brake booster with master cylinder assembly.


c.
C427632C01
1.229,1.958 2.031,1.781 true 1.073,1.865 1.396,2.135 0.323,0.271 10 false *a 2.594,2.458 2.979,2.719 0.385,0.26 10 false *b 1.813,2.458 2.135,2.688 0.323,0.229 10 false *b
*a Paint Mark
*b 90°
V100136

Up


Connect the No. 2 reservoir hose to the brake booster with accumulator pump assembly and slide the clip to secure it.

NOTICE:
·

Make sure that the paint mark is facing up.

·

Install the clip within the range shown in the illustration.




Hide 44551C 2.INSTALL NO. 1 BRAKE ACTUATOR TUBE

Hide 3.INSTALL BRAKE MASTER CYLINDER WITH PUMP ASSEMBLY