89183B
1.INSTALL YAW RATE SENSOR
Install the yaw rate sensor with the 2 nuts.
Do not drop the yaw rate sensor.
If the yaw rate sensor is dropped, replace it with a new one.
Connect the connector to the yaw rate sensor.
Make sure that the yaw rate sensor connector is connected securely.
2.INSTALL CONSOLE BOX ASSEMBLY
3.PERFORM INITIALIZATION AND CALIBRATION
for Electronically Controlled Brake System: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>UTILITY
4. CHECK AND CLEAR DTC