Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM (for 2WD) › 2020.02–2020.11
RM37A0E _51 Engine / Hybrid System _086850 HYBRID / BATTERY CONTROL _0420993 HYBRID CONTROL SYSTEM(for 2WD) C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM(for 2WD)  P1C9F11  Hybrid/EV Battery Current Sensor for Driving Control Circuit Short to Ground  P1C9F15  Hybrid/EV Battery Current Sensor for Driving Control Circuit Short to Auxiliary Battery or Open  


DESCRIPTION

Refer to the description for DTC P0ABF11.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 2WD)>P0ABF11

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1C9F11 Hybrid/EV Battery Current Sensor for Driving Control Circuit Short to Ground Value of "Hybrid Battery Current for Driving Control" (IBA) is excessively low.
(1 trip detection logic)
Battery voltage sensor Comes on Master Warning:
Comes on
P1C9F15 Hybrid/EV Battery Current Sensor for Driving Control Circuit Short to Auxiliary Battery or Open Value of "Hybrid Battery Current for Driving Control" (IBA) is excessively high.
(1 trip detection logic)
Battery voltage sensor Comes on Master Warning:
Comes on

IB0 is used for battery control and IBA is used for driving control. Although IB0 and IBA receive voltage output by the battery current sensor through the same terminal, their output may differ as they are connected through separate filter circuits within the battery voltage sensor.

A369460E05
3.573,1.344 3.948,1.823 0.375,0.479 10 false IB 0.875,2.979 2.615,3.344 1.74,0.365 10 false Battery Current Sensor 3.844,3.406 5.521,3.688 1.677,0.281 10 false Battery Voltage Sensor 4.51,1.625 4.885,2.104 0.375,0.479 10 false C1 4.5,2.438 4.875,2.917 0.375,0.479 10 false C2 5.24,1.448 5.615,1.927 0.375,0.479 10 false IB0 5.219,2.24 5.594,2.719 0.375,0.479 10 false IBA 4.896,2.813 6.323,3.26 1.427,0.448 10 false Analogue / Digital 4.885,2.979 6.313,3.427 1.427,0.448 10 false Converter Circuit 5.479,3.417 6.115,3.688 0.635,0.271 10 false C1 < C2

Related Data List
DTC No. Data List
P1C9F11
·

Hybrid Battery Current for Hybrid Battery Control

·

Hybrid Battery Current for Driving Control


P1C9F15

CONFIRMATION DRIVING PATTERN

HINT:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 2WD)>UTILITY


1.

Connect the GTS to the DLC3.

2.

Turn the ignition switch to ON and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the ignition switch off and wait for 2 minutes or more.

5.

Turn the ignition switch to ON and turn the GTS on.

6.

With ignition switch ON and wait for 10 seconds or more.

7.

Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

8.

Check the DTC judgment result.

HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE, perform driving pattern again.




PROCEDURE

1.CHECK DTC OUTPUT (HYBRID CONTROL)
a.

Check and record any HV system DTCs and Freeze Frame Data.

Powertrain > Hybrid Control > Trouble Codes
50001 397
Result:
Result Proceed to
"Only DTC P1C9F11 / P1C9F15 is output" or "DTC P1C9F11 and DTCs other than those in the following table are output". A
DTC P1C9F11 / P1C9F15 and any of the DTCs in the following table are output at the same time. B


Relevant DTC
P0AFC00 Hybrid/EV Battery Sensor Module
P0AFC96 Hybrid/EV Battery Sensor Module Component Internal Failure
P308A12 Hybrid/EV Battery Voltage Sensor All Circuit Short to Auxiliary Battery
P0ABF11 Hybrid/EV Battery Current Sensor "A" Circuit Short to Ground
P0ABF15 Hybrid/EV Battery Current Sensor "A" Circuit Short to Auxiliary Battery or Open
P0ABF28 Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure
P0ABF2A Hybrid/EV Battery Current Sensor "A" Signal Stuck In Range


b.

Turn the ignition switch off.



A

B