Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for 12.3 Inch Display) › from 2020.11
RM37A0E _56 Audio / Visual / Telematics _086878 NAVIGATION / MULTI INFO DISPLAY _0444619 NAVIGATION SYSTEM(for 12.3 Inch Display) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for 12.3 Inch Display)  Touch Panel Switch does not Function  


CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for 12.3 Inch Display)>PRECAUTION


PROCEDURE

1.CHECK TOYOTA MULTI OPERATION TOUCH SYSTEM (OPERATION CHECK)
a.

Check if the Toyota multi operation touch system is malfunctioning.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>TOYOTA MULTI OPERATION TOUCH SYSTEM>OPERATION CHECK

OK:

No malfunctions are present in the Toyota multi operation touch system.



Result:
Proceed to
OK
NG



OK

2.CHECK MULTI-DISPLAY

NG

2.CHECK MULTI-DISPLAY
a.

Check if there is any foreign matter caught between the display and exterior frame of the multi-display.

OK:

No foreign matter is caught between the display and exterior frame of the multi-display.


HINT:
·

If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.

·

If the ignition switch is turned to ACC or ON with part of your hand touching the multi-display, the display may stop responding correctly.




Result:
Proceed to
OK
NG



OK

3.CHECK TOUCH PANEL

NG

REMOVE FOREIGN MATTER

3.CHECK TOUCH PANEL
a.

Check for foreign matter on the display.

OK:

The display is clean.



Result:
Proceed to
OK
NG



OK

4.CHECK TOUCH SWITCH (OPERATION CHECK)

NG

CLEAN DISPLAY AND RECHECK TOUCH PANEL

4.CHECK TOUCH SWITCH (OPERATION CHECK)
a.
E176521

Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for 12.3 Inch Display)>OPERATION CHECK


b.

Touch the display in the area where the switch malfunction occurs.

OK:

A "+" mark appears at the touched position.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO RECEIVER ASSEMBLY

NG