1. PRECAUTION (for 8 Inch Display)
for Audio and Visual System:
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>PRECAUTION
for Navigation System:
After performing any of the following procedures, the navigation system may restart after turning the ignition switch to ACC for the first time (due to radio and display receiver assembly and navigation ECU certification).
Disconnecting and reconnecting the cable from the negative (-) terminal of the auxiliary battery, replacing the auxiliary battery, or recharging the auxiliary battery after being discharged.
Removing and installing or replacing the radio and display receiver assembly or navigation ECU.
After replacing the radio and display receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.
2. PRECAUTION (for 12.3 Inch Display)
After performing any of the following procedures, the navigation system may restart after turning the ignition switch to ACC for the first time (due to radio receiver assembly and navigation ECU certification).
Disconnecting and reconnecting the cable from the negative (-) terminal of the auxiliary battery, replacing the auxiliary battery, or recharging the auxiliary battery after being discharged.
Removing and installing or replacing the radio receiver assembly or navigation ECU.
After replacing the radio receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.
55405B
3.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 8 Inch Display)
4.REMOVE RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL (for 8 Inch Display)
Remove the 4 bolts.
|
Remove in this Direction |
Pull the radio and display assembly with air conditioning control as shown in the illustration to disengage the 5 clips.
Disconnect each connector.
Disengage the 2 clamps to remove the radio and display assembly with air conditioning control.
5.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display)
Remove the 4 screws.
Disengage the 3 claws to remove the radio and display receiver assembly with bracket.
86211J
6.REMOVE NO. 1 RADIO RECEIVER BRACKET (for 8 Inch Display)
Remove the 2 screws and No. 1 radio receiver bracket.
86212C
7.REMOVE NO. 2 RADIO RECEIVER BRACKET (for 8 Inch Display)
Remove the 2 screws and No. 2 radio receiver bracket.
86140A
8.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for 8 Inch Display)
55405B
9.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 12.3 Inch Display)
10.REMOVE MULTI-DISPLAY WITH AIR CONDITIONING CONTROL (for 12.3 Inch Display)
55420A
11.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for 12.3 Inch Display)
12.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for 12.3 Inch Display)
Disconnect the connector.
Remove the 4 bolts.
Disconnect each connector and remove the radio receiver assembly with bracket.
86211
13.REMOVE NO. 1 RADIO BRACKET (for 12.3 Inch Display)
Remove the 3 screws and No. 1 radio bracket.
86212
14.REMOVE NO. 2 RADIO BRACKET (for 12.3 Inch Display)
Remove the 3 screws and No. 2 radio bracket.
86120
15.REMOVE RADIO RECEIVER ASSEMBLY (for 12.3 Inch Display)