CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 4B-3 - Body ground | Ground | Always | Below 1 Ω |
| 4B-23 - Body ground | Auxiliary battery power supply | Ignition switch off*1
Always*2 |
11 to 14 V |
| 4C-1 - Body ground | Auxiliary battery power supply | Ignition switch off*1
Always*2 |
11 to 14 V |
| 4F-1 - Body ground | Auxiliary battery power supply | Ignition switch off*1
Always*2 |
11 to 14 V |
| H42-19 (GND2) - Body ground | Ground | Always | Below 1 Ω |
*1: for HV Model
*2: for Gasoline Model
Connect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 4A-40 - Body ground*1 | ACC power supply | Ignition switch off | Below 1 V |
| Ignition switch ACC | 11 to 14 V | ||
| 4B-11 - Body ground | Taillight drive output | Taillights on | 11 to 14 V |
| Taillights off | Below 1 V | ||
| 4C-19 - Body ground | R shift position switch signal | Ignition switch off, reverse (R) not selected | Below 1 V |
| Ignition switch ON, reverse (R) selected | 11 to 14 V | ||
| 4C-23 - Body ground*1 | IG power supply | Ignition switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | ||
| 4C-25 - Body ground | FOG FR relay drive output | Taillights on, fog light switch in front position | Below 1 V |
| Taillights on, fog light switch in off position | 11 to 14 V | ||
| 4C-28 - Body ground | Daytime running light system drive output | Daytime running light system operating | Below 1 V |
| Daytime running light system not operating | 11 to 14 V | ||
| 4C-31 - Body ground | H-LP LH relay drive output | Light control switch in head position | Below 1 V |
| Taillight off | 11 to 14 V | ||
| 4C-32 - Body ground | Clearance lights drive output | Taillights on | 11 to 14 V |
| Taillights off | Below 1 V | ||
| 4D-10 - Body ground | Back-up lights drive output | Ignition switch off, reverse (R) not selected | Below 1 V |
| Ignition switch ON, reverse (R) selected | 11 to 14 V | ||
| 4D-21 - Body ground*2 | Rear fog light drive output | Taillights on, fog light switch in rear position | 11 to 14 V |
| Taillights on, fog light switch in off position | Below 1 V | ||
| 4D-30 - Body ground | Taillight and license plate lights drive output | Taillights on | 11 to 14 V |
| Taillights off | Below 1 V | ||
| H43-12 (HRY2) - Body ground | H-LP RH relay drive output | Light control switch in head position | Below 1 V |
| Taillights off | 11 to 14 V | ||
| H43-13 (DIM) - Body ground | High beam headlight drive output | Light control switch in head position and dimmer switch in high or high flash position | Below 1 V |
| Dimmer switch not in high or high flash position | 11 to 14 V | ||
| H43-16 (HEAD) - Body ground | Light control switch head position input | Light control switch in head position | Below 1 V |
| Light control switch not in head position | 11 to 14 V | ||
| H43-23 (CLTB) - H43-25 (CLTE) | Automatic light control sensor power supply output | Ignition switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | ||
| H43-24 (CLTS) - Body ground | Automatic light control sensor signal input | Ignition switch off | Below 1 V |
| Ignition switch ON | Pulse generation
(See waveform 1) |
||
| H43-26 (AHBI) - Body ground | Auto high beam switch signal input | Auto high beam switch on | Below 1 V |
| Auto high beam switch off | 11 to 14 V | ||
| H44-21 (AHID) - Body ground | Auto high beam switch indicator drive output | Ignition switch ON, auto high beam switch on | Below 1 V |
| Ignition switch ON, auto high beam switch off | 11 to 14 V |
*1: for Gasoline Model
*2: w/ Rear Fog Light
Waveform 1
| Item | Content |
|---|---|
| Tester Connection | H43-24 (CLTS) - Body ground |
| Tool setting | 2 V/DIV., 10 ms./DIV. |
| Condition | Ignition switch ON |
The communication waveform changes according to the surrounding brightness.
CHECK COMBINATION METER ASSEMBLY
Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>TERMINALS OF ECU
CHECK FORWARD RECOGNITION CAMERA
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA SYSTEM>TERMINALS OF ECU
CHECK STEERING SENSOR
for HV Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>TERMINALS OF ECU
for Gasoline Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>TERMINALS OF ECU