Home › Engine / Hybrid System › A25A-FXS, A25B-FXS (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR › from 2020.11
RM37A0E _51 Engine / Hybrid System _086908 A25A-FXS EMISSION CONTROL _0449632 DIFFERENTIAL PRESSURE SENSOR A

A25A-FXS EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89481B 2.REMOVE DIFFERENTIAL PRESSURE SENSOR

a.
A478676

Disconnect the differential pressure sensor connector.


b.
A478677

Slide the clip and disconnect the No. 1 vacuum transmitting pipe sub-assembly from the differential pressure sensor.


c.

Remove the nut and differential pressure sensor from the emission control valve bracket.


Hide 25715 3.REMOVE EMISSION CONTROL VALVE BRACKET

HINT:

Perform this procedure only when replacement of the emission control valve bracket is necessary.


a.
A478678

Remove the nut and emission control valve bracket from the fuel pump flange.