53852B
1.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
53851D
2.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
51441
3.REMOVE NO. 1 ENGINE UNDER COVER
51444A
4.REMOVE REAR ENGINE UNDER COVER LH
53737B
5.REMOVE FRONT FENDER APRON SEAL LH
32917
6.REMOVE TRANSMISSION OIL COOLER AIR DUCT
Remove the 3 bolts.
Disengage the guide to remove the transmission oil cooler air duct from the oil cooler assembly.
7.DISCONNECT OIL COOLER HOSE
| *1 | No. 1 Transmission Oil Cooler Hose |
| *2 | No. 2 Transmission Oil Cooler Hose |
Slide the 2 clips and disconnect the No. 1 transmission oil cooler hose and No. 2 transmission oil cooler hose from the oil cooler assembly.
Use a container to catch any fluid which flows out of the No. 1 transmission oil cooler hose, No. 2 transmission oil cooler hose and oil cooler assembly.
32910
8.REMOVE OIL COOLER ASSEMBLY
|
Nut |
|
Bolt |
Remove the 2 nuts, bolt and oil cooler assembly from the oil cooler bracket.
Use a container to catch any fluid which flows out of the oil cooler assembly.
32971
9.REMOVE TRANSMISSION OIL THERMOSTAT
Perform this procedure only when replacement of the transmission oil thermostat is necessary.
| *1 | No. 1 Transmission Oil Cooler Hose |
| *2 | No. 2 Transmission Oil Cooler Hose |
Slide the 2 clips and remove the No. 1 transmission oil cooler hose and No. 2 transmission oil cooler hose from the transmission oil thermostat.
Use a container to catch any fluid which flows out of the No. 1 transmission oil cooler hose, No. 2 transmission oil cooler hose and transmission oil thermostat.
| *1 | No. 3 Transmission Oil Cooler Hose |
| *2 | Outlet No. 1 Oil Cooler Hose |
Slide the 2 clips and disconnect the No. 3 transmission oil cooler hose and outlet No. 1 oil cooler hose from the transmission oil thermostat.
Use a container to catch any fluid which flows out of the No. 3 transmission oil cooler hose, outlet No. 1 oil cooler hose and transmission oil thermostat.
Remove the bolt and oil cooler bracket from the transmission oil thermostat.
Remove the nut and transmission oil thermostat from the oil cooler bracket.
Use a container to catch any fluid which flows out of the transmission oil thermostat.
32913
10.REMOVE OIL COOLER BRACKET
Perform this procedure only when replacement of the oil cooler bracket is necessary.
|
Bolt |
|
Nut |
Remove the bolt and 2 nuts and disengage the guide to remove the oil cooler bracket from the vehicle body.