88625
1.INSTALL NO. 1 COOLER THERMISTOR
88501
2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
3.INSTALL COOLER EXPANSION VALVE
Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 cooler evaporator sub-assembly.
ND-OIL 12 or equivalent
Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Using a 4 mm hexagon socket wrench, install the cooler expansion valve with the 2 hexagon bolts.
88899L
4.INSTALL COOLING UNIT PARTS
87107A
5.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
87124B
6.INSTALL HEATER CLAMP
87128
7.INSTALL HEATER GROMMET
87050D
8.INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
| *a | Link |
Connect the 3 links of the No. 2 air conditioning radiator damper servo sub-assembly to the 3 links of the air conditioning radiator assembly as shown in the illustration.
Install the No. 2 air conditioning radiator damper servo sub-assembly with the 2 screws.
87050C
9.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Single Type)
Align each gear on the air conditioning radiator assembly as shown in the illustration, and then check that the gears of the No. 1 air conditioning radiator damper servo sub-assembly are aligned as shown in the illustration.
| *a | Reference Point | - | - |
Install the No. 1 air conditioning radiator damper servo sub-assembly with the 3 screws.
87050C
10.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Dual Type)
88539J
11.INSTALL DRAIN COOLER HOSE
87114B
12.INSTALL HEATER COVER (w/o PTC Heater)
87710G
13.INSTALL QUICK HEATER ASSEMBLY (w/ PTC Heater)
|
Install in this Direction |
Install the quick heater assembly as shown in the illustration.
87114B
14.INSTALL HEATER COVER (w/ PTC Heater)
Engage the 2 guides and claw.
Install the heater cover with the screw.
Connect the 2 connectors.
Engage the 2 clamps to install the No. 2 instrument panel wire.
82210K
15.INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for LHD)
82210K
16.INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for RHD)
Engage each clamp.
Connect each connector to install the air conditioning harness assembly.
88650N
17.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
87130D
18.INSTALL BLOWER ASSEMBLY
88897P
19.INSTALL ASPIRATOR
87201F
20.INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY