Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Gasoline Model with Manual Air Conditioning System) › from 2020.11
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0453069 AIR CONDITIONING SYSTEM(for Gasoline Model with Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Gasoline Model with Manual Air Conditioning System)  B1417  Evaporator Temperature Circuit  


DESCRIPTION

The rear evaporator temp. sensor (No. 2 air conditioning harness assembly) is installed on the evaporator in the rear cooling unit to detect the temperature of the cooled air that has passed through the evaporator, which is used to control the air conditioning system. It sends signals to the air conditioning amplifier assembly. The resistance of the rear evaporator temp. sensor (No. 2 air conditioning harness assembly) changes in accordance with the temperature of the cooled air that has passed through the evaporator. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.

The air conditioning amplifier assembly applies voltage (5 V) to the rear evaporator temp. sensor (No. 2 air conditioning harness assembly) and reads voltage changes as the resistance of the rear evaporator temp. sensor (No. 2 air conditioning harness assembly) changes. This sensor is used for frost prevention.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1417 Evaporator Temperature Circuit Open or short in rear evaporator temperature sensor circuit
·

Rear evaporator temp. sensor (No. 2 air conditioning harness assembly)

·

Harness or connector between rear evaporator temp. sensor (No. 2 air conditioning harness assembly) and air conditioning amplifier assembly

·

Air conditioning amplifier assembly


Memorized
(4 sec. or more)*

*: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.

WIRING DIAGRAM

E432276E01
0.917,1.552 2.927,1.792 2.01,0.24 10 false Rear Evaporator Temp. Sensor 0.792,2.219 3.604,2.51 2.813,0.292 10 false No. 2 Air Conditioning Harness Assembly 4.604,0.792 4.927,1.021 0.323,0.229 10 false H65 4.823,1.792 7.094,2.104 2.271,0.313 10 false Air Conditioning Amplifier Assembly 4.646,0.594 4.927,0.833 0.281,0.24 10 false 11 4.646,1.052 4.927,1.292 0.281,0.24 10 false 15 5.01,0.688 5.531,0.969 0.521,0.281 10 false TEC 5.01,1.167 5.479,1.417 0.469,0.25 10 false SG-9 5.885,0.292 6.167,0.531 0.281,0.24 10 false 5 V 6.469,0.792 6.75,1.031 0.281,0.24 10 false AD 4.615,1.26 4.938,1.49 0.323,0.229 10 false H65 3.458,1.26 3.781,1.49 0.323,0.229 10 false M15 3.448,0.792 3.771,1.021 0.323,0.229 10 false M15 3.552,0.583 3.708,0.781 0.156,0.198 10 false 8 3.552,1.052 3.708,1.25 0.156,0.198 10 false 7 3.198,0.667 3.354,0.865 0.156,0.198 10 false + 3.208,1.167 3.365,1.365 0.156,0.198 10 false -

PROCEDURE

1.READ VALUE USING GTS (EVAP TEMP SENSOR (REAR))
a.

Read the Data List according to the display on the GTS.

Body Electrical > Air Conditioner > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Evap Temp Sensor (Rear) Rear evaporator temp. sensor (No. 2 air conditioning harness assembly) Min.: -29.70°C (-21.46°F)
Max.: 59.55°C (139.19°F)
Actual evaporator (rear) temperature displayed Rear evaporator temp. sensor (No. 2 air conditioning harness assembly) circuit malfunction
·

When open circuit: -29.70°C (-21.46°F)

·

When short circuit: 59.55°C (139.19°F)


Body Electrical > Air Conditioner > Data List
Tester Display
Evap Temp Sensor (Rear)
50003 121 55
OK:

The display is as specified in the normal condition column.



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

2.INSPECT REAR EVAPORATOR TEMP. SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
2.INSPECT REAR EVAPORATOR TEMP. SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)

OK

3.CHECK HARNESS AND CONNECTOR (REAR EVAPORATOR TEMP. SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY) - AIR CONDITIONING AMPLIFIER ASSEMBLY)

NG

REPLACE REAR EVAPORATOR TEMP. SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)

3.CHECK HARNESS AND CONNECTOR (REAR EVAPORATOR TEMP. SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY) - AIR CONDITIONING AMPLIFIER ASSEMBLY)
a.

Disconnect the H65 air conditioning amplifier assembly connector.


b.

Disconnect the M15 rear evaporator temp. sensor (No. 2 air conditioning harness assembly) connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H65-11 (TEC) - M15-8 (+) Always Below 1 Ω
H65-15 (SG-9) - M15-7 (-) Always Below 1 Ω
H65-11 (TEC) or M15-8 (+) - Body ground Always 10 kΩ or higher
H65-15 (SG-9) or M15-7 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR