Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Rear No. 1 Seat LH Side) › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0453894 OCCUPANT DETECTION SENSOR(for Rear No. 1 Seat LH Side) A

SEAT BELT  OCCUPANT DETECTION SENSOR(for Rear No. 1 Seat LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.


PROCEDURE

Hide 72526E 2.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

Hide 72058D 5.REMOVE REAR SEAT NO. 1 LOCK CONTROL LEVER SUB-ASSEMBLY LH

Hide 72058E 6.REMOVE REAR SEAT NO. 2 LOCK CONTROL LEVER SUB-ASSEMBLY LH

Hide 8.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

Hide 71612A 9.REMOVE OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD LH)

a.
B604697C01
0,0 0,0 false
V100155

Fastener


Disengage the 5 fasteners.


b.

Using a screwdriver, disengage the 14 claws as shown in the illustration and remove the occupant detection sensor (rear seat cushion pad LH) from the separate type rear seat cushion cover.

B564009C01
1.5,2.417 1.833,2.417 false 1.854,2.333 2.167,2.531 0.313,0.198 10 false *a
*a Screwdriver - -