Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Rear No. 2 Seat) › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0453910 OCCUPANT DETECTION SENSOR(for Rear No. 2 Seat) A

SEAT BELT  OCCUPANT DETECTION SENSOR(for Rear No. 2 Seat)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.REMOVE REAR NO. 2 SEAT ASSEMBLY

Hide 71503A 2.REMOVE OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD SUB-ASSEMBLY)

a.
B601276

Disengage the 2 clamps.


b.

Disengage the 19 hooks.

B564575


c.

Using a screwdriver, disengage the 14 claws as shown in the illustration and remove the occupant detection sensor (rear seat cushion pad sub-assembly) from the No. 2 seat cushion cover sub-assembly.

B571158C01
1.521,2.354 1.792,2.354 false 1.813,2.271 2.125,2.469 0.313,0.198 10 false *a
*a Screwdriver - -