Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Rear No. 2 Seat) › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0453910 OCCUPANT DETECTION SENSOR(for Rear No. 2 Seat) A

SEAT BELT  OCCUPANT DETECTION SENSOR(for Rear No. 2 Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.


PROCEDURE

Hide 71503A 1.INSTALL OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD SUB-ASSEMBLY)

NOTICE:

Be careful not to damage the No. 2 seat cushion cover sub-assembly.


HINT:

When installing a No. 2 seat cushion cover sub-assembly, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.

Engage the 14 claws.

B571159


b.

Engage the 19 hooks to install the occupant detection sensor (rear seat cushion pad sub-assembly).

B564575


c.
B601276

Engage the 2 clamps.


Hide 2.INSTALL REAR NO. 2 SEAT ASSEMBLY