Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA › from 2020.11
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0417630 FRONT CAMERA A

CRUISE CONTROL  FRONT CAMERA  INSTALLATION  


PROCEDURE

Hide 8646C 1.INSTALL FORWARD RECOGNITION CAMERA

NOTICE:
·

When replacing the forward recognition camera, replace it with a new one.

·

If the forward recognition camera has been struck or dropped, replace it with a new one.

·

If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.

·

Do not touch the camera lens. If the camera lens has been touched, do not use the forward recognition camera.

·

Replace the forward recognition camera if there is any foreign matter on the camera lens.

·

If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, front camera system, lane control system, road sign assist system, pre-collision system, lighting system (EXT) may not operate properly due to a difference in the transmissivity or black ceramic border.

·

If the inner surface of the windshield glass in the area in front of the forward recognition camera is dirty, remove the forward recognition hood, clean the glass, then reinstall the forward recognition hood and forward recognition camera.

Forward recognition hood removal: Click hereEngine / Hybrid System>CRUISE CONTROL>CAMERA HEATER>REMOVAL

Forward recognition hood installation: Click hereEngine / Hybrid System>CRUISE CONTROL>CAMERA HEATER>INSTALLATION



a.

When using a new forward recognition camera (w/ Protective Film):

i.
E430626C01
1.823,0.604 2.427,0.365 true 2.448,0.25 2.76,0.406 0.313,0.156 10 false *a
*a Protective Film


Remove the protective film.

NOTICE:

Do not touch the camera lens after removing the protective film.




b.
E430627C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 guides as shown in the illustration.

NOTICE:

Do not touch the camera lens.



c.

Connect the connector to install the forward recognition camera.


Hide 86464A 2.INSTALL FORWARD RECOGNITION LATCH

NOTICE:

Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.


a.
E430628C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 guides and 2 claws as shown in the illustration to install the forward recognition latch.


Hide 86466D 3.INSTALL NO. 1 FORWARD RECOGNITION COVER

a.
E430629C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 clips and 2 guides as shown in the illustration to install the No. 1 forward recognition cover.


Hide 86466E 4.INSTALL NO. 2 FORWARD RECOGNITION COVER

a.
E430630C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 forward recognition cover.


Hide 8646C 5.ADJUST FORWARD RECOGNITION CAMERA

a.

If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.

HINT:

Forward Recognition Camera Learning can be performed by using either Target Adjustment (One Time Recognition) or Target Adjustment (Sequential Recognition) or Driving Adjustment.

Target Adjustment (One Time Recognition): Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>TARGET ADJUSTMENT(ONE TIME RECOGNITION)

Target Adjustment (Sequential Recognition): Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION)

Driving Adjustment: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>DRIVING ADJUSTMENT