Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › from 2020.11
RM37A0E _56 Audio / Visual / Telematics _086880 PARK ASSIST / MONITORING _0419518 PANORAMIC VIEW MONITOR SYSTEM C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  U0073  Control Module Communication Bus Off  U0100  Lost Communication With ECM/PCM "A"  U0126  Steering Sensor Communication  U0129  Lost Communication with Brake System Control Module  U0140  Lost Communication with Body Control Module  U0163  Lost Communication With Navigation Control Module  U0233  Lost Communication with Blind Spot Monitor Master Module  U0265  Lost Communication with Image Processing Sensor A  U0293  Lost Communication with Hybrid Control Module  U1110  Lost Communication with Clearance Warning ECU  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Control Module Communication Bus Off Control module communication bus off CAN communication system
U0100 Lost Communication With ECM/PCM "A" Lost Communication with ECM CAN communication system
U0126 Steering Sensor Communication Lost communication with steering sensor CAN communication system
U0129 Lost Communication with Brake System Control Module Lost communication with skid control ECU or No. 2 skid control ECU CAN communication system
U0140 Lost Communication with Body Control Module Lost communication with main body ECU (multiplex network body ECU) CAN communication system
U0163 Lost Communication With Navigation Control Module Lost communication with radio and display receiver assembly or radio receiver assembly CAN communication system
U0233 Lost Communication with Blind Spot Monitor Master Module Lost Communication with Blind spot monitor sensor LH CAN communication system
U0265 Lost Communication with Image Processing Sensor A Lost Communication with rear television camera assembly CAN communication system
U0293 Lost Communication with Hybrid Control Module Lost communication with hybrid vehicle control ECU assembly CAN communication system
U1110 Lost Communication with Clearance Warning ECU Lost communication with clearance warning ECU assembly CAN communication system

PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 353

b.

Check for DTCs.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 353
Result:
Result Proceed to
DTCs are output A
No DTCs are output B


HINT:
·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even if the DTC was not output when rechecking for DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>PROBLEM SYMPTOMS TABLE





A

B