DTCs may be stored during the inspection procedure. Be sure to clear the DTCs and check that no DTCs are output after the inspection is finished.
1.INSPECT PRESSURE SENSOR
Check the auxiliary battery voltage.
11 to 14 V (while the ignition switch is off)
Set a pedal effort gauge and SST.
Simultaneously measure the brake fluid pressure of all 4 wheels, or 2 wheels at a time.
| *a | Pedal Effort Gauge |
| *b | SST (LSPV Gauge) |
| *c | SST (No. 1 Nipple) |
Set a pedal effort gauge and SST.
Move the shift lever to P and apply the parking brake.
Bleed air from SST (LSPV gauge).
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for HV Model)>BLEEDING
Inspect the master cylinder sensor 1, reaction force pressure and servo pressure.
Check the value output from "Master Cylinder Sensor 1", "Reaction Force Pressure" and "Servo Pressure" by depressing the brake pedal.
| Tester Display |
|---|
| Master Cylinder Sensor 1 |
| Tester Display |
|---|
| Reaction Force Pressure |
| Servo Pressure |
| Pedal Effort | Reaction Force Pressure
(MPa) |
Servo Pressure
(MPa) |
Master Cylinder Sensor 1
(MPa) |
Front Left Wheel Hydraulic Pressure | Front Right Wheel Hydraulic Pressure |
|---|---|---|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 0.00 to 0.68 | 0.58 to 4.58 | 0.28 to 4.28 | 0.28 to 4.28 MPa (2.9 to 43.6 kgf/cm2, 41 to 621 psi) | 0.28 to 4.28 MPa (2.9 to 43.6 kgf/cm2, 41 to 621 psi) |
| 100 N (10 kgf, 22.5 lbf) | 0.61 to 1.41 | 3.64 to 7.64 | 3.34 to 7.34 | 3.34 to 7.34 MPa (34.1 to 74.8 kgf/cm2, 484 to 1064 psi) | 3.34 to 7.34 MPa (34.1 to 74.8 kgf/cm2, 484 to 1064 psi) |
| 150 N (15 kgf, 33.7 lbf) | 1.29 to 2.09 | 6.10 to 10.10 | 5.80 to 9.80 | 5.80 to 9.80 MPa (59.1 to 99.9 kgf/cm2, 841 to 1421 psi) | 5.80 to 9.80 MPa (59.1 to 99.9 kgf/cm2, 841 to 1421 psi) |
| 200 N (20 kgf, 45.0 lbf) | 1.96 to 2.76 | 7.30 to 11.30 | 7.00 to 11.00 | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) |
| Pedal Effort | Reaction Force Pressure
(MPa) |
Servo Pressure
(MPa) |
Master Cylinder Sensor 1
(MPa) |
Rear Left Wheel Hydraulic Pressure | Rear Right Wheel Hydraulic Pressure |
|---|---|---|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 0.00 to 0.68 | 0.58 to 4.58 | 0.28 to 4.28 | 0.28 to 4.28 MPa (2.9 to 43.6 kgf/cm2, 41 to 621 psi) | 0.28 to 4.28 MPa (2.9 to 43.6 kgf/cm2, 41 to 621 psi) |
| 100 N (10 kgf, 22.5 lbf) | 0.61 to 1.41 | 3.64 to 7.64 | 3.34 to 7.34 | 3.34 to 7.34 MPa (34.1 to 74.8 kgf/cm2, 484 to 1064 psi) | 3.34 to 7.34 MPa (34.1 to 74.8 kgf/cm2, 484 to 1064 psi) |
| 150 N (15 kgf, 33.7 lbf) | 1.29 to 2.09 | 6.10 to 10.10 | 5.80 to 9.80 | 5.80 to 9.80 MPa (59.1 to 99.9 kgf/cm2, 841 to 1421 psi) | 5.80 to 9.80 MPa (59.1 to 99.9 kgf/cm2, 841 to 1421 psi) |
| 200 N (20 kgf, 45.0 lbf) | 1.96 to 2.76 | 7.30 to 11.30 | 7.00 to 11.00 | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) |
| Pedal Effort | Reaction Force Pressure
(MPa) |
Servo Pressure
(MPa) |
Master Cylinder Sensor 1
(MPa) |
Front Left Wheel Hydraulic Pressure | Front Right Wheel Hydraulic Pressure |
|---|---|---|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 0.00 to 0.68 | 0.30 to 4.30 | 0.00 to 4.00 | 0.00 to 4.00 MPa (0.0 to 40.8 kgf/cm2, 0 to 580 psi) | 0.00 to 4.00 MPa (0.0 to 40.8 kgf/cm2, 0 to 580 psi) |
| 100 N (10 kgf, 22.5 lbf) | 0.61 to 1.41 | 3.23 to 7.23 | 2.93 to 6.93 | 2.93 to 6.93 MPa (29.9 to 70.7 kgf/cm2, 425 to 1005 psi) | 2.93 to 6.93 MPa (29.9 to 70.7 kgf/cm2, 425 to 1005 psi) |
| 150 N (15 kgf, 33.7 lbf) | 1.29 to 2.09 | 5.52 to 9.52 | 5.22 to 9.22 | 5.22 to 9.22 MPa (53.2 to 94.0 kgf/cm2, 757 to 1337 psi) | 5.22 to 9.22 MPa (53.2 to 94.0 kgf/cm2, 757 to 1337 psi) |
| 200 N (20 kgf, 45.0 lbf) | 1.96 to 2.76 | 7.30 to 11.30 | 7.00 to 11.00 | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) |
| Pedal Effort | Reaction Force Pressure
(MPa) |
Servo Pressure
(MPa) |
Master Cylinder Sensor 1
(MPa) |
Rear Left Wheel Hydraulic Pressure | Rear Right Wheel Hydraulic Pressure |
|---|---|---|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 0.00 to 0.68 | 0.30 to 4.30 | 0.00 to 4.00 | 0.00 to 4.00 MPa (0.0 to 40.8 kgf/cm2, 0 to 580 psi) | 0.00 to 4.00 MPa (0.0 to 40.8 kgf/cm2, 0 to 580 psi) |
| 100 N (10 kgf, 22.5 lbf) | 0.61 to 1.41 | 3.23 to 7.23 | 2.93 to 6.93 | 2.93 to 6.93 MPa (29.9 to 70.7 kgf/cm2, 425 to 1005 psi) | 2.93 to 6.93 MPa (29.9 to 70.7 kgf/cm2, 425 to 1005 psi) |
| 150 N (15 kgf, 33.7 lbf) | 1.29 to 2.09 | 5.52 to 9.52 | 5.22 to 9.22 | 5.22 to 9.22 MPa (53.2 to 94.0 kgf/cm2, 757 to 1337 psi) | 5.22 to 9.22 MPa (53.2 to 94.0 kgf/cm2, 757 to 1337 psi) |
| 200 N (20 kgf, 45.0 lbf) | 1.96 to 2.76 | 7.30 to 11.30 | 7.00 to 11.00 | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) | 7.00 to 11.00 MPa (71.4 to 112.2 kgf/cm2, 1015 to 1595 psi) |
Remove the pedal effort gauge and SST.
Remove the pedal effort gauge and SST, and bleed the brake line.
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for HV Model)>BLEEDING
Inspect the accumulator pressure.
While fully depressing the brake pedal 4 or 5 times, check that the "ECB Motor Relay" changes to ON once or more.
| Tester Display |
|---|
| ECB Motor Relay |
| Accumulator Pressure |
Usually the "ECB Motor Relay" is OFF.
After confirming that the brake booster pump motor stops, check the value output from "Accumulator Pressure".
15 to 21 MPa
47210L
2.INSPECT BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY
Check the auxiliary battery voltage.
11 to 14 V (while the ignition switch is off)
Set a pedal effort gauge and SST.
Simultaneously measure the brake fluid pressure of all 4 wheels, or 2 wheels at a time.
| *a | Pedal Effort Gauge |
| *b | SST (LSPV Gauge) |
| *c | SST (No. 1 Nipple) |
Set a pedal effort gauge and SST.
Move the shift lever to P and apply the parking brake.
Bleed air from SST (LSPV gauge).
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for HV Model)>BLEEDING
Check operation without brake boost.
Inspect and adjust the brake pedal height.
for LHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE PEDAL (for HV Model LHD)>ADJUSTMENT
for RHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE PEDAL (for HV Model RHD)>ADJUSTMENT
| *A | for LHD |
| *B | for RHD |
| *a | Fluid Level Support Line |
| *b | MIN Line |
Adjust the brake fluid level of the reservoir so that it is between the MIN line and fluid level support line.
Select "Motor Deactivate" on the "ECB (Electronically Controlled Brake system) Utility" screen.
| Tester Display |
|---|
| ECB Utility |
Perform "Motor Deactivate" according to the display on the GTS.
Depress the brake pedal 40 times or more to return all the fluid in the accumulator back to the reservoir.
A buzzer may sound due to low accumulator pressure. As this is not a malfunction, continue the procedure.
Check that the brake pedal is firm.
Check the values output from "Stroke Sensor" and "Stroke Sensor2" by depressing the brake pedal.
| Tester Display |
|---|
| Stroke Sensor |
| Tester Display |
|---|
| Stroke Sensor2 |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Front Left Wheel Hydraulic Pressure | Front Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.61 to 2.31 | 2.69 to 3.39 | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) |
| 500 N (51 kgf, 112.4 lbf) | 2.05 to 2.75 | 2.25 to 2.95 | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Rear Left Wheel Hydraulic Pressure | Rear Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.61 to 2.31 | 2.69 to 3.39 | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) |
| 500 N (51 kgf, 112.4 lbf) | 2.05 to 2.75 | 2.25 to 2.95 | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Front Left Wheel Hydraulic Pressure | Front Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.55 to 2.25 | 2.75 to 3.45 | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) |
| 500 N (51 kgf, 112.4 lbf) | 1.96 to 2.66 | 2.34 to 3.04 | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Rear Left Wheel Hydraulic Pressure | Rear Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.55 to 2.25 | 2.75 to 3.45 | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) | 0.00 to 2.89 MPa (0.0 to 29.5 kgf/cm2, 0 to 419 psi) |
| 500 N (51 kgf, 112.4 lbf) | 1.96 to 2.66 | 2.34 to 3.04 | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) | 1.16 to 5.16 MPa (11.8 to 52.6 kgf/cm2, 168 to 748 psi) |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Front Left Wheel Hydraulic Pressure | Front Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.50 to 2.20 | 2.80 to 3.50 | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) |
| 500 N (51 kgf, 112.4 lbf) | 1.89 to 2.59 | 2.41 to 3.11 | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Rear Left Wheel Hydraulic Pressure | Rear Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.50 to 2.20 | 2.80 to 3.50 | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) |
| 500 N (51 kgf, 112.4 lbf) | 1.89 to 2.59 | 2.41 to 3.11 | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Front Left Wheel Hydraulic Pressure | Front Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.55 to 2.25 | 2.75 to 3.45 | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) |
| 500 N (51 kgf, 112.4 lbf) | 1.97 to 2.67 | 2.33 to 3.03 | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
Rear Left Wheel Hydraulic Pressure | Rear Right Wheel Hydraulic Pressure |
|---|---|---|---|---|
| 200 N (20 kgf, 45.0 lbf) | 1.55 to 2.25 | 2.75 to 3.45 | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) | 0.00 to 2.88 MPa (0.0 to 29.4 kgf/cm2, 0 to 418 psi) |
| 500 N (51 kgf, 112.4 lbf) | 1.97 to 2.67 | 2.33 to 3.03 | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) | 1.13 to 5.13 MPa (11.5 to 52.3 kgf/cm2, 164 to 744 psi) |
Check the performance of the brake booster with master cylinder assembly by comparing the pedal force with the value of the LSPV gauge and each stroke sensor. If there is a problem, determine the state of the brake booster with master cylinder assembly by using these results together with the results from inspecting the brake pedal stroke sensor.
Remove the pedal effort gauge and SST, and bleed the brake system.
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for HV Model)>BLEEDING
Check the value output from "Accumulator Pressure".
| Tester Display |
|---|
| Accumulator Pressure |
15 to 21 MPa
3.INSPECT STROKE SIMULATOR (BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY)
Check the auxiliary battery voltage.
11 to 14 V (while the ignition switch is off)
Set a pedal effort gauge.
Set a pedal effort gauge.
Move the shift lever to P and apply the parking brake.
Check operation with brake boost.
Depress the brake pedal 4 or 5 times.
Check the values output from "Stroke Sensor" and "Stroke Sensor2" by depressing the brake pedal.
| Tester Display |
|---|
| Stroke Sensor |
| Tester Display |
|---|
| Stroke Sensor2 |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 1.20 to 1.90 | 3.10 to 3.80 |
| 100 N (10 kgf, 22.5 lbf) | 1.42 to 2.12 | 2.88 to 3.58 |
| 150 N (15 kgf, 33.7 lbf) | 1.61 to 2.31 | 2.69 to 3.39 |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 1.17 to 1.87 | 3.13 to 3.83 |
| 100 N (10 kgf, 22.5 lbf) | 1.37 to 2.07 | 2.93 to 3.63 |
| 150 N (15 kgf, 33.7 lbf) | 1.55 to 2.25 | 2.75 to 3.45 |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 1.20 to 1.90 | 3.10 to 3.80 |
| 100 N (10 kgf, 22.5 lbf) | 1.42 to 2.16 | 2.88 to 3.58 |
| 150 N (15 kgf, 33.7 lbf) | 1.61 to 2.31 | 2.69 to 3.39 |
| Pedal Effort | Stroke Sensor
(V) |
Stroke Sensor2
(V) |
|---|---|---|
| 50 N (5 kgf, 11.2 lbf) | 1.17 to 1.87 | 3.13 to 3.83 |
| 100 N (10 kgf, 22.5 lbf) | 1.37 to 2.07 | 2.93 to 3.63 |
| 150 N (15 kgf, 33.7 lbf) | 1.55 to 2.25 | 2.75 to 3.45 |