Reserve Tank
Intercooler
COMPONENTS

REMOVAL
1. DRAIN COOLANT (
Click Here
)
2. DISCONNECT INLET HOSE
3. DISCONNECT OUTLET HOSE
4. REMOVE RESERVE TANK ASSEMBLY
(a) Remove the 3 bolts and the reserve tank assembly.
-
(b) Remove the 3 screws and the reserve tank from the bracket.
-
INSTALLATION
1. INSTALL RESERVE TANK ASSEMBLY
(a) Install the reserve tank to the bracket with the 3 screws.
Torque:
10 N*m
(102 kgf*cm,
7.0 ft.*lbf)
-
(b) Install the reserve tank assembly with the 3 bolts.
Torque:
6 mm bolt
14 N*m
(143 kgf*cm,
10 ft.*lbf)
8 mm bolt
18 N*m
(183 kgf*cm,
13 ft.*lbf)
-
2. CONNECT OUTLET HOSE
3. CONNECT INLET HOSE
4. ADD COOLANT (
Click Here
)
5. CHECK FOR COOLANT LEAKS
(a) Check for engine coolant leaks (
Click Here
)
-