Front Brake Flexible Hose
Brake
COMPONENTS

REMOVAL
HINT:
• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.
1. REMOVE FRONT WHEEL
2. DRAIN BRAKE FLUID
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.
3. REMOVE FRONT FLEXIBLE HOSE
(a) Remove the brake tube and wheel cylinder tube from the flexible hose with SST while holding the flexible hose with a wrench.
SST
09023-00101
NOTICE:
• Do not bend or damage the brake tube and wheel cylinder tube.
• Do not allow any foreign matter such as dirt and dust to enter the brake tube and wheel cylinder tube from the connecting points.
-
(b) Remove the 2 clips and flexible hose.
-
4. REMOVE FRONT NO. 1 WHEEL CYLINDER TUBE LH
(a) Using SST, remove the wheel cylinder tube from the brake cylinder.
SST
09023-00101
NOTICE:
• Do not bend or damage the wheel cylinder tube.
• Do not allow any foreign matter such as dirt and dust to enter the wheel cylinder tube from the connecting points.
-
INSTALLATION
1. INSTALL FRONT NO. 1 WHEEL CYLINDER TUBE LH
(a) Using SST, install the wheel cylinder tube to the brake cylinder.
SST
09023-00101
Torque:
15.2 N*m
(155 kgf*cm,
11 ft.*lbf)
NOTICE:
• Do not bend or damage the wheel cylinder tube.
• Do not allow any foreign matter such as dirt and dust to enter the wheel cylinder tube from the connecting points.
-
2. INSTALL FRONT FLEXIBLE HOSE
(a) Attach the 2 clips to the flexible hose.
-
(b) Using SST, connect the flexible hose to the brake tube and wheel cylinder tube while holding the flexible hose with a wrench.
SST
09023-00101
Torque:
15.2 N*m
(155 kgf*cm,
11 ft.*lbf)
without SST
14 N*m
(143 kgf*cm,
10 ft.*lbf)
with SST
NOTICE:
• Do not bend or damage the brake tube and wheel cylinder tube.
• Do not allow any foreign matter such as dirt and dust to enter the brake tube and wheel cylinder tube from the connecting points.
-
3. FILL RESERVOIR WITH BRAKE FLUID (
Click Here
)
4. BLEED AIR FROM BRAKE LINE (
Click Here
)
5. CHECK BRAKE FLUID LEVEL IN RESERVOIR (
Click Here
)
6. CHECK FOR BRAKE FLUID LEAKAGE
7. INSTALL FRONT WHEEL