FRONT SPEED SENSOR (for 2WD) > INSTALLATION |
| 1. INSTALL FRONT SPEED SENSOR LH |
![]() |
Install the 2 harness clamps with the 2 bolts.
Install the speed sensor with the bolt.
![]() |
Install the harness clamp with the bolt.
![]() |
Install the harness clamp with the bolt.
Attach the clamp.
Connect the connector.

Attach the 2 clamps and the connector.
| 2. INSTALL FRONT WHEEL |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. CHECK SPEED SENSOR SIGNAL |
Check the speed sensor signal (Click here).