DECELERATION SENSOR (for 4WD and Pre-Runner without VSC) > INSTALLATION |
| 1. INSTALL DECELERATION SENSOR |
![]() |
Connect the sensor connector.
Set the deceleration sensor to the crossmember.
| 2. INSTALL SENSOR BRACKET |
![]() |
Install the sensor bracket with the 2 bolts.
| 3. INSTALL FLOOR CARPET COVER |
Insert the floor carpet cover into the sensor bracket.
Insert the positioning boss of the floor carpet cover into the hole in the bracket of the sensor.
Attach the 4 claws to install the floor carpet cover.
| 4. INSTALL FRONT SEAT ASSEMBLY RH |
for Separate Seat:
Install the front seat assembly RH (Click here).
w/ Front Seat Side Airbag:
Install the front seat assembly RH (Click here).
for Bench Seat:
Remove the front seat assembly RH (Click here).
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |