DTC No.
| DTC Detection Condition (All of following are 1 trip detection logic)
| Trouble Area
|
P2120
| Condition (a) continues for 0.5 sec. or more: (a) VPA is 0.4 V or less or VPA is 4.8 V or more
| - Accelerator pedal position sensor
- Accelerator pedal
- Accelerator pedal rod (arm) deformed
- ECM
|
P2122
| VPA is 0.4 V or less for 0.5 sec. or more when VPA2 output indicates that accelerator pedal is opened
| - Accelerator pedal position sensor
- Open in VCPA circuit
- VPA circuit open or ground short
- Accelerator pedal
- Accelerator pedal rod (arm) deformed
- ECM
|
P2123
| Condition (a) continues for 2.0 sec. or more: (a) VPA is 4.8 V or more
| - Accelerator pedal position sensor
- Open in EPA circuit
- Accelerator pedal
- Accelerator pedal rod (arm) deformed
- ECM
|
P2125
| Condition (a) continues for 0.5 sec. or more: (a) (VPA2 is 1.2 V or less) or (VPA2 is 4.8 V or more)
| - Accelerator pedal position sensor
- Accelerator pedal
- Accelerator pedal rod (arm) deformed
- ECM
|
P2127
| VPA2 is 1.2 V or less for 0.5 sec. or more when VPA output indicates that accelerator pedal is opened
| - Accelerator pedal position sensor
- Open in VCP2 circuit
- VPA2 circuit open or ground short
- Accelerator pedal
- Accelerator pedal rod (arm) deformed
- ECM
|
P2128
| Conditions (a) and (b) continue for 2.0 sec. or more: (a) VPA2 is 4.8 V or more (b) VPA is 0.4 V to 3.45 V
| - Accelerator pedal position sensor
- Open in EPA2 circuit
- Accelerator pedal
- Accelerator pedal rod (arm) deformed
- ECM
|
P2138
| Condition (a) or (b) continues for 2.0 sec. or more: (a) Difference between VPA and VPA2 is 0.02 V or less (b) VPA is 0.4 V or less and VPA2 is 1.2 V or less
| - VPA and VPA2 circuit are short-circuited
- Accelerator pedal position sensor
- Accelerator pedal
- Accelerator pedal rod (arm) deformed
- ECM
|
-
| Accelerator pedal position expressed as voltage output
|
-
| Accelerator pedal released
| Accelerator pedal depressed
|
Trouble Area
| Accelerator Position No. 1
| Accelerator Position No. 2
| Accelerator Position No. 1
| Accelerator Position No. 2
|
VCP circuit open
| 0 to 0.2 V
| 0 to 0.2 V
| 0 to 0.2 V
| 0 to 0.2 V
|
VPA circuit open or ground short
| 0 to 0.2 V
| 1.4 to 1.8 V
| 0 to 0.2 V
| 3.7 to 5.0 V
|
VPA2 circuit open or ground short
| 0.6 to 1.0 V
| 0 to 0.2 V
| 2.9 to 4.2 V
| 0 to 0.2 V
|
EP circuit open
| 4.5 to 5.0 V
| 4.5 to 5.0 V
| 4.5 to 5.0 V
| 4.5 to 5.0 V
|