Home › ENGINE ยท 1KD-FTV › FUEL › INJECTOR DRIVER (w/o EGR Cooler)

INJECTOR DRIVER (w/o EGR Cooler) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.

NOTICE:
When disconnecting the cable, systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE INJECTOR DRIVER


    A231857
  1. Disconnect the 3 connectors.

  1. Remove the 2 bolts and injector driver.



3. REMOVE INJECTOR DRIVER BRACKET


    A211900
  1. Remove the 3 screws and injector driver bracket.