POWER SEAT SWITCH > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
Remove the front seat assembly (Click here).
| 2. REMOVE RECLINING POWER SEAT SWITCH KNOB |
![]() |
Apply protective tape around the cushion shield.
Using a screwdriver, detach the 2 claws and remove the knob.
| 3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() |
Using a screwdriver, detach the 4 claws and remove the knob.
| 4. REMOVE FRONT SEAT CUSHION SHIELD RH |
![]() |
Remove the 2 screws.
![]() |
Remove the 3 screws.
Detach the claw and guide.
Remove the cushion shield.
| 5. REMOVE FRONT POWER SEAT SWITCH |
![]() |
Remove the 3 screws.
Disconnect the connector and remove the switch.