Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER MOTOR

HEADLIGHT CLEANER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER COVER
  1. Remove the front bumper cover (Click here).



2. DRAIN WASHER FLUID


    B210373
  1. Disconnect the washer hose from the headlight cleaner motor and pump, and drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.



3. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    B210374
  1. Disconnect the connector.

  1. Remove the headlight cleaner motor and pump.

    HINT:
    Use a container to collect the washer fluid.