Home › BODY › SEAT › FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag)

FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. INSTALL FRONT SEAT ASSEMBLY
  1. Place the front seat assembly in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the connectors under the seat.

  1. Temporarily install the front seat assembly with the 4 bolts.

  1. Lift up the seat track adjusting handle and move the seat to the rearmost position.



    B211079E01
  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Lift up the seat track adjusting handle and move the seat to the foremost position.



    B211078E01
  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



2. INSTALL FRONT SEAT HEADREST ASSEMBLY


3. INSTALL OUTER SEAT TRACK BRACKET COVER


    B108448E03
  1. Attach the 2 claws in the order shown in the illustration to install the cover.

    NOTICE:
    Be careful not to damage the claws.



4. INSTALL INNER SEAT TRACK BRACKET COVER


    B108449E03
  1. Attach the 2 claws in the order shown in the illustration to install the cover.

    NOTICE:
    Be careful not to damage the claws.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



6. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).