REAR SPEED SENSOR > ON-VEHICLE INSPECTION |
| 1. INSPECT REAR SPEED SENSOR |
Measure the resistance of the sensor.

| Tester Connection | Specified Condition |
| 1 - 2 | 0.65 to 1.8 kΩ |
| 1 - Body ground | 10 kΩ or higher |
| 2 - Body ground | 10 kΩ or higher |
| 2. INSPECT REAR SPEED SENSOR (SKID CONTROL SENSOR WIRE) |
Measure the resistance of the rear speed sensor (skid control sensor wire).

| Tester Connection | Specified Condition |
| 1 - 2 | 0.65 to 2.0 kΩ |
| 1 - Body ground | 10 kΩ or higher |
| 2 - Body ground | 10 kΩ or higher |