Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT (for Automatic Air Conditioning System)

BLOWER UNIT (for Automatic Air Conditioning System) > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT ASSEMBLY
  1. Remove the air conditioning unit assembly (Click here).



2. REMOVE BLOWER ASSEMBLY


    E175031
  1. Remove the 2 screws.

  1. Detach the blower assembly from the air conditioning radiator assembly.



3. REMOVE NO. 3 AIR DUCT


    E173216
  1. Detach the 4 claws and remove the duct.



4. REMOVE RECIRCULATION DAMPER SERVO SUB-ASSEMBLY


E173263
  1. Remove the 2 screws and damper servo.



5. REMOVE BLOWER RESISTOR


E173264
  1. Remove the 2 screws and blower resistor.



6. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


E173265
  1. Remove the 3 screws and blower with fan motor.