STARTER (for 2.2 kW Type Bosch Made) > INSTALLATION |
| 1. INSTALL STARTER ASSEMBLY |
![]() |
Connect the ground wire and install the starter with the 2 bolts.
Install the starter wire to terminal 30 with the nut.
Connect the starter connector.
| 2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Install the release cylinder with the 2 bolts.
| 3. INSTALL FRONT FENDER SEAL |
Install the seal with the 5 clips.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |