Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT LEVELING SWITCH

HEADLIGHT LEVELING SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT LEVELING SWITCH


B122917
  1. Attach the 2 claws and install the headlight leveling switch.



2. INSTALL NO. 1 SWITCH HOLE BASE


B087865E03
  1. Detach the 4 claws and remove the switch hole base.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.