FOG LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL FOG LIGHT ASSEMBLY RH WITH BRACKET |
![]() |
Install the fog light and fog cover with the 2 bolts.
Connect the connectors.
| 2. INSTALL FOG LIGHT ASSEMBLY LH WITH BRACKET |
![]() |
Install the fog light and fog cover with the 2 bolts.
Connect the connectors.
| 3. INSTALL FRONT BUMPER COVER |
w/ Fog light:
Connect the 2 fog light connectors.
![]() |
Put protective tape under the front fender.
Attach the 4 claws to install the cover.
![]() |
Install the 9 clips.
| 4. INSTALL ENGINE SIDE COVER SUB-ASSEMBLY LH (for 4WD) |
![]() |
Attach the 2 claws to install the retainer.
Install the screw.
| 5. INSTALL ENGINE SIDE COVER SUB-ASSEMBLY RH (for 4WD) |
| 6. INSTALL FRONT FENDER LINER LH |
![]() |
Install the fender liner with the 3 clips and screw.
| 7. INSTALL RADIATOR GRILLE |
![]() |
Push the radiator grille in the direction indicated by the arrow in the illustration. Attach the 5 claws to install the radiator grille.
Install the 2 screws and 2 clips.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 9. PERFORM INITIALIZATION |
Perform initialization (Click here).