VACUUM SWITCHING VALVE (w/ EGR Cooler) > INSTALLATION |
| 1. INSTALL NO. 2 VACUUM SWITCHING VALVE (for No. 2 EGR) |
![]() |
Install the No. 2 VSV to the manifold stay with the screw.
| 2. INSTALL NO. 1 VACUUM SWITCHING VALVE (for EGR Cut) |
![]() |
Install the No. 1 VSV to the manifold stay with the screw.
| 3. CONNECT NO. 3 VACUUM TRANSMITTING HOSE |
Connect the vacuum hose to the VSV (for No. 2 EGR valve) shown in the illustration below.
| 4. CONNECT NO. 1 VACUUM TRANSMITTING HOSE |
Connect the vacuum hose to the VSV (for E-VRV) shown in the illustration below.
| 5. CONNECT NO. 2 VACUUM TRANSMITTING HOSE |
Connect the vacuum hose to the VSV (for electric EGR control valve) shown in the illustration below.

| 6. INSTALL MANIFOLD STAY WITH VACUUM SWITCHING VALVE |
![]() |
Install the manifold stay with VSV with the 2 bolts, and connect the No. 1 vacuum transmitting hose (color is "Blue") to the No. 2 vacuum transmitting pipe.
![]() |
Connect the 3 vacuum hoses.
![]() |
Connect the 2 connectors.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 8. PERFORM INITIALIZATION |
Perform initialization (Click here).