Home › ENGINE ยท 2KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE (w/ EGR System with EGR Cooler)

VACUUM REGULATING VALVE (w/ EGR System with EGR Cooler) > INSTALLATION

for Preparation Click here



1. INSTALL ELECTRIC VACUUM REGULATING VALVE


    A151139
  1. Install the electric vacuum regulating valve with bracket with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



    A151138
  1. Connect the 4 vacuum hoses.

    NOTICE:
    Install the vacuum hoses so that they completely cover the pipes.



    A151137
  1. Connect the connector.



2. INSTALL GAS FILTER


    A151136
  1. Install the gas filter with bracket with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the 2 vacuum hoses.

    NOTICE:
    Install the vacuum hoses so that they completely cover the pipes.



3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


A135916
  1. Install the engine cover with the 3 bolts and 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


5. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.