Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 RADIO BRACKET


    B206642
  1. w/ Cassette Tape Player:

    1. Install the No. 2 radio bracket and radio receiver panel LH to the radio receiver with the 4 screws.



    B206127
  1. w/ CD Player:

    1. Install the No. 2 radio bracket to the radio receiver with the 4 screws.



    B206645
  1. w/ CD Player and Cassette Tape Player:

    1. Install the No. 2 radio bracket to the radio receiver with the 4 screws.



2. INSTALL NO. 1 RADIO BRACKET


    B206641
  1. w/ Cassette Tape Player:

    1. Install the No. 1 radio bracket and radio receiver panel RH to the radio receiver with the 4 screws.



    B206126
  1. w/ CD Player:

    1. Install the No. 1 radio bracket to the radio receiver with the 4 screws.



    B206644
  1. w/ CD Player and Cassette Tape Player:

    1. Install the No. 1 radio bracket to the radio receiver with the 4 screws.



3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    B207249
  1. w/ Cassette Tape Player:

    1. Connect all the connectors.

    2. Install the radio receiver assembly with bracket with the 4 screws.



    B207243
  1. w/ CD Player:

    1. Connect all the connectors.

    2. Install the radio receiver assembly with bracket with the 4 screws.



    B207242
  1. w/ CD Player and Cassette Tape Player:

    1. Connect all the connectors.

    2. Install the radio receiver assembly with bracket with the 4 screws.



4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Air Conditioning System)


E117035
  1. Connect all the connectors.

  1. Attach the 6 claws and 4 clips to install the panel.



5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B113049E01
  1. Connect all connectors.

  1. Attach the 6 claws and 4 clips to install the panel.

  1. Install the panel with the screw <C>.



6. INSTALL FRE/REC CONTROL KNOB


B111103E02
  1. Install the control knob.



7. INSTALL HEATER CONTROL KNOB


B088680E02
  1. Install the 3 control knobs.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).