Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE HEATER CONTROL KNOB


B088680E02
  1. Remove the 3 control knobs.



3. REMOVE FRE/REC CONTROL KNOB


B111103E01
  1. Remove the control knob.



4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B113048E01

HINT:
To prevent the clips from falling, horizontally pull out the panel. Hold both sides of the panel in the locations indicated by the arrows in the illustration.

  1. Remove the screw <C>.

  1. Detach the 6 claws and 4 clips.

  1. NOTICE:
    Make sure the center registers are not removed.

    Disconnect all connectors and remove the panel.



5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Air Conditioning System)


E117035
  1. Using a screwdriver, detach the 6 claws and 4 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect all the connectors and remove the panel.



6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    B207249
  1. w/ Cassette Tape Player:

    1. Remove the 4 screws.

    2. Disconnect all the connectors and remove the radio receiver assembly with bracket.



    B207243
  1. w/ CD Player:

    1. Remove the 4 screws.

    2. Disconnect all the connectors and remove the radio receiver assembly with bracket.



    B207242
  1. w/ CD Player and Cassette Tape Player:

    1. Remove the 4 screws.

    2. Disconnect all the connectors and remove the radio receiver assembly with bracket.



7. REMOVE NO. 1 RADIO BRACKET


    B206641
  1. w/ Cassette Tape Player:

    1. Remove the 4 screws, radio receiver panel RH and No. 1 radio bracket from the radio receiver.



    B206126
  1. w/ CD Player:

    1. Remove the 4 screws and No. 1 radio bracket from the radio receiver.



    B206644
  1. w/ CD Player and Cassette Tape Player:

    1. Remove the 4 screws and No. 1 radio bracket from the radio receiver.



8. REMOVE NO. 2 RADIO BRACKET


    B206642
  1. w/ Cassette Tape Player:

    1. Remove the 4 screws, radio receiver panel LH and No. 2 radio bracket from the radio receiver.



    B206127
  1. w/ CD Player:

    1. Remove the 4 screws and No. 2 radio bracket from the radio receiver.



    B206645
  1. w/ CD Player and Cassette Tape Player:

    1. Remove the 4 screws and No. 2 radio bracket from the radio receiver.